Sports par Markus Schlegel

eMaxMobileApp

Télécharger eMaxMobileApp (1,19 €) sur iPhone & iPad. Cette application iOS est dans la catégorie Sports sur l’App Store.
eMaxMobileAppeMaxMobileAppeMaxMobileAppeMaxMobileAppeMaxMobileAppeMaxMobileAppeMaxMobileAppeMaxMobileAppeMaxMobileAppeMaxMobileAppeMaxMobileAppeMaxMobileAppeMaxMobileAppeMaxMobileApp


⭐⭐⭐✨★ (7 votes, moyenne : 3,43 / 5)

Version : 1.58

Appareil : iPhone & iPad

Compatibilité : iOS 12.0 +

Taille : 12,05 Mo

Prix : 1,19 €

Télécharger sur l'App Store

Description
…the most advanced optimizing tool for STEPS systems.
All Bluetooth capable SC-EM800, SC-E8000, SC-E7000, SC-E6100 and EW-EN100 display are supported!
Additionally to DU-E80X0 motors, now DU-EP800, DU-E7000, DU-E6XXX and DU-E50X0 drive units are supported too.
Partially compatible also with the latest Shimano motor firmware versions!
See www.eMax-Tuning.com or get detailed & personal information via eMail from [email protected]

Version 1.58

Changements récents
TAKE CARE: For increasing motor max. support speed an additional license key is necessary! See also www.eMax-Tuning.com.
TAKE CARE: This version is not able to increase max. motor support with the latest motor firmware versions from Shimano!
Please have a look on the news section of www.eMax-Tuning.com/home-en#news for possibilities or contact us via [email protected]

This version 1.58 for STEPS drive units is capable to communicate with the SC-EM800, SC-E8000, SC-E7000, SC-E6100 and EW-EN100 display types.
Additionally to DU-E80X0 motors, now DU-EP800, DU-E7000, DU-E6XXX and DU-E50X0 drive units are supported too.

All “motor performance settings” and “special settings” (change of gear type, chainring & smallest rear sprocket size, remaining light time) could be used in the license free version.

Special to DU-E80X0 drive units:
With motor firmware equal or above 4.7.0 it is only possible to set the motor performance settings up to 300% assist ratio and torque to 70Nm.
(with motor firmware 4.2.7 – 4.6.1, the max. assist ratio value could be set 500%)
(with motor firmware 4.2.7 – 4.6.1 AND a valid license key the max. torque could be increased to 75Nm, max. peak power also would be increased then to 550W instead of standard 500W)

new in version 1.58 (28.10.22):
– corrections for display speed adjustment (special settings)

new in version 1.57 (18.10.22):
– update to newest firmware version 4.4.8 for DUE50X0
– update to newest firmware version 4.7.5 for DUE61X0 & DUE7000
– update to newest firmware version 4.9.4 for DUE80X0
– update to newest firmware version 4.1.9 for DUEP800 (EP8, EP8-CRG. EP8-RS)

new in version 1.56 (17.10.22):
– new battery types added
– change of EP8 profile OEM default settings added

new in version 1.55 (01.10.22):
– display speed adjustment
– torque range min. value added
– improvements and indication for special EP8 types

new in version 1.54 (10.07.22):
– bugfix for changing cassette type on some drive units

new in version 1.53 (08.07.22):
– minor fixes (darkmode & typo)

new in version 1.52 (20.06.22):
– gear mode configuration expanded to hubs (Alfine / Nexus)
– gear mode configuration accessible for all drive units

new in version 1.51 (29.03.22):
– update to newest firmware versions 4.4.7 for DUE50X0

new in version 1.50 (15.03.22):
– update to newest firmware versions 4.7.4 for DUE61X0 & DUE7000
– update to newest firmware versions 4.9.3 for DUE80X0

new in version 1.49 (22.02.22):
– 32 teeth chainring size added for DUEP800 (EP8)

new in version 1.48 (24.12.21):
– update to newest firmware versions 4.1.8 for DUEP800 (EP8)

new in version 1.47 (25.11.21):
– update to newest firmware versions 4.1.7 for DUEP800 (EP8)

new in version 1.46 (18.11.21):
– optimization for EP8-RS
– typo

new in version 1.45 (07.09.21):
– update to newest firmware versions 4.1.6 for DUEP800 (EP8) & 4.4.5 for DUE50X0

new in version 1.44 (03.06.21):
– update to newest firmware version 4.1.5 for EP8

ver. 1.43 (05.05.21):
– chainring & rear sprocket size for DUE5xxx and DUE6xxx added

ver. 1.42 (17.04.21):
– new battery type BT-E8016 added

ver. 1.41 (11.04.21):
– new battery types added
– bugfix (profile 2 EP8-RS default translation error)

ver. 1.40 (06.04.21):
– update to firmware 4.4.4 for DUE50X0 (DUE5000, DUE5080)
– update to fw. 4.7.2 for DUE61X0 (DUE6100, DUE6110, DUE6180)
– update to fw. 4.7.2 for DUE7000
– update to fw. 4.1.4 for EP8
– profiles added for EP8/EP8-RS
– reduced max. speed for EP8 added
– smallest sprocket for EP8 set to 10 (instead of 11)
– dark mode issue on light settings solved
1.066

Partage(s)
4.1/5 - (112 votes)

Les commentaires sont fermés.

Suivez-nous
Rechercher
Top 5 articles du mois